
9
z.one ultra and z.one ultra sp OPERATOR MANUAL 9-13
Printing OB & GYN Reports
You can print OB & GYN Calc reports (OB & GYN trending graphs and calculation
results tables) to a network printer that supports PostScript Level 3 and must
include a local networked Ethernet port. See also
“Postscript Level 3
Network-Capable Color Printer” on page 12-7.
NOTE: See also “OB Calculation Package” on page 9-26.
To Set Up OB/GYN Report Direct Printing
1. Select the following parameters on the Printer/Export Configuration screen
(
Figure 9-10).
2. Click Apply to save settings.
NOTE: To enable networked printing of OB/GYN reports, an IP Address for the
ZONARE system must be configured on the Network Configuration screen (see
Figure 13-1 on page 13-2 for more information).
To Print Reports
1. Perform the desired OB/GYN calculations and measurements on the scan.
2. To print the Report, select Print at the bottom of the Report page.
NOTE: If printing was configured for Print/Export at End of Exam, the Report will
automatically print at the end the current exam.
Paper Size
• Letter
•A4
• Select for letter-size paper
• Select for A4-size paper
Print/Export on End of Exam ■ Select to transfer Report/Worksheet data at end
of exam
Only Export Final Report Results ■ Select to export final Report only; not
Worksheets
Printer IP Address ■ Select network printer in drop-down box
* You can print OB/GYN reports directly to a qualified printer; see “Printing OB & GYN
Reports” below.
** If you select export serial data, a Report button displays on the Report page.
Table 9-2. Calcs Printer/Export Parameters (Continued)
Parameter Setting
Parameter Setting
OB/GYN Output Type Select print report
Print Destination Select network printer
Paper Size Select letter
Printer IP Address Select from drop-down list
Print/Export on End of Exam Check box as desired for print behavior
Commentaires sur ces manuels