Quatech Audio/Video Capture USB 2.0 Spécifications télécharger pdf (Page 280)

11-8 z.one ultra and z.one ultra sp OPERATOR MANUAL

 To Configure Store/Print Button

NOTE: See also “Setting Up or Adding a Local (USB) Printer” on page 12-5 and

“To Configure a DICOM Printer” on page 13-7 to set up your printer destination.

The System has a Store button and a Print button. The steps below describe

configuring the Print button to print to a local printer. These are the same general

instructions you would use to configure the Store button.

1. On the Image Store/Print Buttons screen, point the cursor over the

checkbox next to Network/USB Printer under the Print heading. Press Set

to check the box.

2. Move the cursor to the drop-down box to the right of Network/USB Printer.

3. Press Set to open the drop-down list of all configured printers. Options may

include printing via a network connection to a DICOM printer and printing to a

local dedicated printer (e.g., Sony UP-D897 Digital B/W USB 2.0 printer).

4. Select the printer you want and click Apply.

5. The System will now print to the selected printer when Print button is

pressed.

NOTE: See Table 11-3 on page 11-6 for information on configuring IQ Scan, 3D

Volume Data, Live Capture, and Still Image Type options.

Image Transfer Mode If Image Transfer Mode is configured, images

are immediately stored to the internal storage

media each time the Store (or Print, if

configured) button is pressed. The timing for

when the images are actually sent to the target

printer or network storage device is user

configurable.

Options:

■ Exam in Progress: Immediately places

each successive image into the queue

(where network transfer will immediately

begin) upon each press of the Store button

by the user.

■ End Exam: Images in exam are temporarily

buffered each time the user presses the

Store button. Images are not placed into the

queue, and no network transfer is initiated to

the storage device until the user closes the

current exam. This method allows the user

to delete images from the Current Exam

before the exam is transferred to the

storage or print device.

Reports ■ If storing DICOM structured reports

(page 13-14) or User Customizable

Worksheets/Reports (page 9-7), select

storage destination from drop-down list.

Table 11-3. Image Store/Print Buttons Screen Parameters (Continued)

Parameter Description

1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 403 404

Commentaires sur ces manuels

Pas de commentaire

Quatech Audio/Video Capture USB 2.0 Spécifications Page 280

Commentaires sur ces manuels