
13
z.one ultra and z.one ultra sp OPERATOR MANUAL 13-11
5. Fill in the data fields (see Table 13-4). Use the QWERTY Tab key (or Trackball
and Set button) to advance to the next data field.
6. Select Apply to save the configuration and return to the DICOM Network
Storage Administration screen (
Figure 13-11).
7. To check the connection:
a. Select Ping.
If a low-level network connection has been made, the following
message appears:
ICMP Echo: xx.xx.xx.xx is alive [xx.xx.xx.xx is the IP address of the
configured device].
If a connection has not been made, the following message appears:
ICMP Echo: xx.xx.xx.xx timed out [xx.xx.xx.xx is the IP address of
the configured device].
b. Select Verify.
If a DICOM-level connection has been made, the following message
appears:
Verification of communication succeeded
If a connection has not been made, the message Connection failure
displays. If so, repeat this procedure from Step 1 or contact your
network/
PACS administrator.
8. To exit, press Enter (Enter/Select for SmartCart sp) or Freeze.
NOTE: For information about IQ Scan Data and storing IQ Scan Data, see
page 11-10.
Table 13-4. DICOM Network Storage Destination
Parameters
Parameter Description
Nickname
e.g., Storage Server
Informal name to identify the device to users in the
department. This name is typically assigned in the
department.
DICOM Application Title
e.g., PACS_STORE1
Name assigned to the target DICOM Storage
device by the PACS Admin to identify it on the
DICOM network.
IP Address TCP/IP network IP address assigned by the IT
Admin, to the target DICOM Storage device.
Port Number TCP/IP port number assigned by the PACS Admin,
for use by the DICOM Storage device. Default port
value is 104.
Max PDU Receive/Send Size Size (in bytes) of the basic data packets (PDU) that
will be transferred during receive and transmit
operations (default is 16384 = 16K).
Commentaires sur ces manuels