Quatech Audio/Video Capture USB 2.0 Spécifications télécharger pdf (Page 358)

14-16 z.one ultra and z.one ultra sp OPERATOR MANUAL

Figure 14-29. Insert Removable Media

6. A software installation dialog box will display on the LCD display:

Install media detected. Do you wish to install new software: Yes/No

7. To begin the software installation, press the Select button on the Scan Engine

for each of the two (2) dialog boxes that are sequentially displayed.

NOTE: If the software revision of the removable media is the same as the current

version in the

Scan Engine and you want to cancel, select No. If you want to

cancel for any other reason, press the Back key and then manually remove the

removable media.

8. The software install process is as follows:

• System license verification

• Software file transfer (download)

• Software validation

The complete software downloading sequence will take approximately 5

minutes.

9. At the completion of successful software installation, a dialog box displays on

the LCD screen, instructing the user to remove the removable media and

press any key to reboot the

Scan Engine.

10. Remove the removable media from the Scan Engine.

11. Press any key on the System and it will reboot and begin normal operation.

 To Install System Software (SmartCart/SmartCart sp)

IMPORTANT: System software for the SmartCart/SmartCart sp must be installed

with the

Scan Engine docked on the SmartCart/SmartCart sp.

1. Dock the Scan Engine on the SmartCart/SmartCart sp (see “Docking/

Undocking Scan Engine/Scan Module” on page 2-9).

2. Power ON the SmartCart/SmartCart sp (see “Powering ON/OFF” on

page 2-10).

3. Insert the removable media (USB Memory Stick) into a USB port on the rear

of the

SmartCart/SmartCart sp, pressing lightly to ensure that it is seated.

4. A software installation dialog box will display on the LCD display:

1 2 ... 353 354 355 356 357 358 359 360 361 362 363 ... 403 404

Pas de commentaire

Quatech Audio/Video Capture USB 2.0 Spécifications Page 358